AWT88P walk-through body temperature detector ( automatic scan body medical thermometer ) can detect Lassa virus human fever body temperature, human body temperature, hand-foot-mouth disease ( HFMD ) body temperature, H1N1 swine flu & H3N2 flu human fever body temperatures, H7N9 bird flu body fever temperature, Ebola virus disease ( EVD ) & MERS virus & Zika virus human fever body temperatures, Malaria virus & Dengue Fever human fever body temperatures and human body fever temperatures of other various flus & viruses. AWT88P detector can detect and find a fever patient who is caused by any virus or flu.
TECOS AWT88P walk-through body temperature detector has a high sensitive detection temperature, detects a wide range and fast speed, it doesn't interfere with the measured target, and its use is safe. Only when a person passes through it in the detection body range, this detector shows an immediate human body surface temperature, an operator can obtain accurate data. If they are suspicious fever patients, it will immediately report to the police apparatus, is a timely and effective manner to prevent VIRUS flow of cross-infection.
TECOS AWT88P walk-through body temperature detector has a non-contact measurement temperature, high accuracy, fast speed measurement, over-temperature alarm, is particularly suitable for ports, ports of entry, airports, stations, hospitals, hotels, prisons, schools, kindergartens, exhibitions, borders, factories, public places and other occasions to use, suitable for large flow of people in the public for the rapid detecting human body temperatures.
1. Non-contact detection, safe and reliable, floor design, after the probes scan 0.3 ~ 0.5 seconds, it displays detection results and its results are digital show. The red and green light-emitting diodes display the work state to be clear and intuitive, its measurement system can automatically open. 2. Many vertical scanning probes are in order to adapt to different height people for accurate measurements. An automatic voice broadcast system broadcasts monitoring results.
Optional: After starting the detector, a green light flashes, when it encounters a high temperature, the green light goes out, is turned off, and in the meanwhile the red light flashes and it gives an alarm sound.
After starting the detector, a green light does not brighten, when someone passes through it, the green light flashes in a normal temperature, but in a high temperature the red light flashes and it gives an alarm sound.
1. Door Size: 2100 mm (H) x 980 mm (W) x 880 mm (depth). 2. Repeated measurement and time interval: 0.5 seconds. 3. Relative humidity: 80%. Voltage: 110V, 220V (±10%), 50Hz/60Hz. Temperature resolution: 0.1℃. Door frame made by alloy, its appearance is high-grade. Alarm temperature: 37.5 ℃, ( this temperature can be free to be set, for example: 37 ℃, 37.1 ℃, 37.2 ℃, 37.3 ℃, 37.4 ℃ and so on ). The factory setup is 37.5 ℃, the body temperature exceeds it for the alarm. Fever alarm. Install more than 13 medical detection body temperature sensors in this system, medical body temperature sensors manufactured in Germany.
Conform to European Medical Device Directive (MDD) 93/42/EEC and EMC Directive 2014/30/EU international safety standards as follows:
1. Conform to EN 60601-1:2006+A11:2011+A1:2013+A12:2014 medical device international safety standard. Conform to EN 60601-1-2:2007 medical device emission and immunity international safety standards. 2. Conform to EN55011:2009+A1:2010 medical equipment international safety standard. Conform to all international health safety standards. 3. Product Conforms to EN 61000-3-3:2013 and EN 61000-3-2:2014 international safety product standards. 4. European CE and EMC international Medical Device standard certificates.